Watch this quick step-by-step guide to learn how to change the face shield on your XP14 dual sport helmet from Typhoon Helmets.

Installation Instructions

Step 1: Remove both side plates by gently prying up to detach.

Step 2: Remove screws, one on each side, using a small phillips head screw driver.

Step 3: To install, line up the face shield so the screw holes on the shield match with the holes on the helmet.

Step 4: Hand tigten the screws attaching the face shield to the helmet.

Step 5: Attach the side plates covering the screws by inserting the tabs of the side plates into the helmet.

Step 6: Gently press the the side plates until they pop into place and are fully secured.